|
Feature
|
Advantage
|
| Translucent Illuminated Front
Panel |
Easy viewing of control panel
at night. |
| CH 9/Normal Switch |
Instant selection of emergency
Channel 9 operation or regular 40 channel operation. |
| Built
in PA system |
For
use in emergency vehicles |
| Individual ANL On/Off Switch
and Noise Blanker selection |
Turns On/Off the Automatic Noise
Limiter in the audio circuits for the best in Noise elimination.
|
| Front Microphone Connector |
Allows installation to be in
or under dash. |
| Mic Gain Control |
Adjusts microphone for increased
voice clarity. |
| RF Gain |
Adjusts receive gain for weak
or strong signals. |
| SWR Calibration |
Allows calibration of SWR meter
for peak tuning of antenna for maximum performance of system. |
| Clarifier Control |
Tunes the received frequency
above or below the channel frequency to optimize AM signal. |
| SRF/SWR/CAL Switch |
Switches multi-meter function
for reading Received Signal Strength & RF output, Antenna SWR, and
SWR Calibration. |
| NB On/Off Switch |
Turns On/Off the Noise Blanker
for increased noise reduction such as ignition interference. |
| CB/PA Switch |
Use CB radio as a Public Address
System with PA speaker. Receive signals can also be monitored through
PA. |
| HI/LOW Tone Switch |
Changes the tone quality of
the received signal. Switch to Tone position for increased treble, Low
for increased bass sound. |
| TX/RX Light |
LED transmit (red)/receive (green)
indicator. |
| Antenna Warning Indicator Light |
Immediately illuminates when
radio senses high SWR from a bad connection or mismatched antenna |
| 4 Watts AM RF Power Output |
The maximum allowed by law.
|
| External Speaker Jack |
Allows monitoring the received
signals when away from radio.
|
